juan keymer 609515df6a added arduino code to test a pulled up push button | пре 7 месеци | |
---|---|---|
README.md | пре 7 месеци | |
push_button_pull_up.ino | пре 7 месеци |
The idea is to gather here all code needed to prepare the Arduino Z of a HomeScope. The codes are:
1.- push_button_pull_up.ino
Arduino code to test a Push down button which is pulled up by a 10K resistor to the +5V line.
When the button is pressed the input signal in pin 2 is grounded the pin13 LED is turned on.